The MDW-102 is a simple to use, high accuracy, hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and even to eliminate the thickness of the paint or coating. The DW-102 now offers Through-Coating Thickness Measuring Capability - You can now test painted tanks, pipes, etc., without needing to remove the paint or make corrections for the paint thickness.

DW-102 is manufactured under the strict quality control guidelines established by ISO 9001: 2000 Standards. Its quality is insured by our return policy and full-coverage warranty.

 

Features

• Measuring Method: Ultrasonic pulse echo

• Measuring Frequency: 5MHz

• Measuring Range: 0.8 - 250.0 mm in Standard Mode or, 3.0 mm - 23.0 mm in Through-Coating Mode

• Display in both mm and inch

• Accuracy: +/- (1%H +/- 0.05) mm

• Sound velocity range: 1,000 - 9,999m/s

• Memory capacity: up to 500 test values

• 4 digit LCD display with advanced backlight

• Automatic power-off after being idle for 3 minutes

• Probe contact indicator

• Low battery indicator

• Display Resolution: 0.1mm or 0.001 inch

• Power Supply: 2 X 1.5V AA Standard Batteries

• Working temperature: -10 ºC ~ +60ºC

 

Standard Delivery 

• Main Processor with Calibration Block (4.0 mm)

• Dual Element (echo to echo) Probe, Probe end Diameter: 8.0 mm

• Coupling Paste (kind of oil)

• Operation Manual in English

• Consumer-Type 2 AA Type Alkaline Battery (3 volt)

• Foam-Fitted Carrying Case

 

Optional Accessories

• 4mm end-diameter probe with cable (working range: 0.8 mm - 22.0 mm or 0.03 in - 0.85 inch, standard mode only) ($199.00 extra) 

• Communication Kit (RS-232 Cable + Software) between PC and tester unit ($229.00 extra)

• RS-232 to USB Converter with driver CD ($15.00 extra)

• 5 Level (4 step) Calibration Block ($59.00 extra)

• Rubber Protective Case ($39.00 extra)

• Standard Mode Probe ($79.00 extra)